Maintenance
G070101AUN-UK
•
•
Use only soft (de-mineralized) water in
the coolant mixture.
The engine in your vehicle has alu-
minium engine parts and must be pro-
tected by an ethylene-glycol-based
coolant to prevent corrosion and freez-
ing.
•
•
DO NOT USE alcohol or methanol
coolant or mix them with the specified
coolant.
Do not use a solution that contains
more than 60% antifreeze or less than
OPA077004R
OPA077005R
Check the condition and connections of
all cooling system hoses and heater
hoses. Replace any swollen or deterio-
rated hoses.
The coolant level should be filled
between F and L marks on the side of the
coolant reservoir when the engine is
cool.
WARNING - Radiator cap
35%
antifreeze, which would reduce
Do not remove the radiator cap
when the engine and radiator are
hot. Scalding hot coolant and
steam may blow out under pres-
sure causing serious injury.
the effectiveness of the solution.
For mixture percentage, refer to the fol-
lowing table.
If the coolant level is low, add enough
specified coolant to provide protection
against freezing and corrosion. Bring the
level to F, but do not overfill. If frequent
additions are required, see a HYUNDAI
authorised repairer for a cooling system
inspection.
Mixture Percentage (volume)
Ambient
Temperature
Antifreeze
Water
-15°C (5°F)
-25°C (-13°F)
-35°C (-31°F)
-45°C (-49°F)
35
40
50
60
65
60
50
40
7
19
| Categories | Hyundai Manuals, Hyundai i10 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, i10 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)