Features of your vehicle
FUEL FILLER LID
D100200AUN
Closing the fuel filler lid
1. To install the cap, turn it clockwise until
it “clicks”. This indicates that the cap is
securely tightened.
2. Close the fuel filler lid and push it light-
ly and make sure that it is securely
closed.
D100300APA-UK
WARNING - Refuelling
OPA047032R
OPA047017
•
If pressurised fuel sprays out, it
can cover your clothes or skin
and thus subject you to the risk
of fire and burns. Always remove
the fuel cap carefully and slowly.
If the cap is venting fuel or if you
hear a hissing sound, wait until
the condition stops before com-
pletely removing the cap.
D100100APA
Opening the fuel filler lid
1. Stop the engine.
2. To
filler lid opener up.
3. Pull
open.
4. To
cap (2) counterclockwise.
5. Refuel as needed.
open the fuel filler lid, pull the fuel
The fuel filler lid must be opened from
inside the vehicle by pulling up on the
fuel filler lid opener located on the front
floor area under the driver’s seat.
the fuel filler lid (1) out to fully
remove the cap, turn the fuel tank
✽
NOTICE
If the fuel filler lid will not open because
ice has formed around it, tap lightly or
push on the lid to break the ice and
release the lid. Do not pry on the lid. If
necessary, spray around the lid with an
approved de-icer fluid (do not use radi-
ator anti-freeze) or move the vehicle to a
warm place and allow the ice to melt.
• Do not "top off" after the nozzle
automatically shuts off when
refuelling.
• Always check that the fuel cap is
installed securely to prevent fuel
spillage in the event of an acci-
dent.
4
17
| Categories | Hyundai Manuals, Hyundai i10 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, i10 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)