Maintenance
EMISSION CONTROL SYSTEM (IF EQUIPPED)
G270000AEN-UK
G270202AUN
The emission control system of your
Purge Control Solenoid Valve (PCSV)
G270100AUN
vehicle is covered by a written limited
warranty. Please see the warranty infor-
mation contained in the Service Passport
in your vehicle.
The purge control solenoid valve is con-
trolled by the Engine Control Module
(ECM); when the engine coolant temper-
ature is low during idling, the PCSV clos-
es so that evaporated fuel is not taken
into the engine. After the engine warms-
up during ordinary driving, the PCSV
opens to introduce evaporated fuel to the
engine.
1. Crankcase emission control
system
The positive crankcase ventilation sys-
tem is employed to prevent air pollution
caused by blow-by gases being emitted
from the crankcase. This system supplies
fresh filtered air to the crankcase through
the air intake hose. Inside the crankcase,
the fresh air mixes with blow-by gases,
which then pass through the PCV valve
into the induction system.
Your vehicle is equipped with an emis-
sion control system to meet all applicable
emission regulations.
There are three emission control sys-
tems, as follows.
(1) Crankcase emission control system
(2) Evaporative emission control system
(3) Exhaust emission control system
G270300AUN-UK
3. Exhaust emission control
system
The Exhaust Emission Control System is
a highly effective system which controls
exhaust emissions whilst maintaining
good vehicle performance.
In order to assure the proper function of
the emission control systems, it is rec-
ommended that you have your car
G270200AUN-UK
2. Evaporative emission control
The Evaporative Emission Control
System is designed to prevent fuel
vapours from escaping into the atmos-
phere.
inspected
and maintained by a
HYUNDAI authorised repairer in accor-
dance with the maintenance schedule in
this manual.
G270301AUN
Caution
Maintenance Test (With Electronic
Stability Program (ESP) system)
for
the
Inspection
and
G270201AUN-UK
Canister
Vehicle modifications
This vehicle should not be modified.
Modification of your vehicle could affect
its performance, safety or durability and
may even violate governmental safety
and emissions regulations.
In addition, damage or performance
problems resulting from any modification
may not be covered under warranty.
Fuel vapours generated inside the fuel
tank are absorbed and stored in the
onboard canister. When the engine is
running, the fuel vapours absorbed in the
canister are drawn into the surge tank
through the purge control solenoid valve.
•
To prevent the vehicle from misfiring
during dynamometer testing, turn the
Electronic Stability Program (ESP)
system off by pressing the ESP
switch.
•
After dynamometer testing is complet-
ed, turn the ESP system back on by
pressing the ESP switch again.
7
63
| Categories | Hyundai Manuals, Hyundai i10 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, i10 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)