Maintenance
12. Reinstall
the headlight assembly to
the body of the vehicle.
Position light bulb
1. Remove the socket from the assembly
by pulling it out.
2.
Remove the bulb by pulling it straight
out.
3. Insert a new bulb into the socket.
4. Install the socket into the assembly by
pushing it in.
Turn signal light bulb
1. Remove the socket from the assembly
by turning the socket counter clock-
wise
until the tabs on the socket align with the
slots on the assembly.
OPA077036
OPA077047
3. Disconnect
the power connector from
the back of the headlight assembly.
4. Remove the headlight bulb cover by
turning it counterclockwise.
the headlight bulb socket-
5. Disconnect
connector.
6. Unsnap
2.
Remove the bulb from the socket by
the headlight bulb retaining
wire by depressing the end and push-
ing it upward.
pressing it in and rotating it until the
tabs on the bulb align with the slots in
the socket. Pull the bulb out of the
socket.
7. Remove
assembly.
the bulb from the headlight
3. Insert a new bulb by inserting it into the
socket and rotating it until it locks into
place.
4. Install the socket into the assembly by
aligning the tabs on the socket with the
slots in the assembly. Push the socket
into the assembly and turn the socket
clockwise.
8. Install a new headlight bulb and snap
the headlight bulb retaining wire into
position by aligning the wire with the
groove on the bulb.
9. Connect
connector.
10. Install
turning it clockwise.
the headlight bulb socket
the headlight bulb cover by
11. Connect
the power connector to the
back of the headlight assembly.
7
51
| Categories | Hyundai Manuals, Hyundai i10 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, i10 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)