Power windows
Window opening and closing
Auto up/down window
Pressing or pulling up the power win-
dow switch momentarily to the second
detent position (6) completely lowers
or raises the window even when the
switch is released.To stop the window
at the desired position while the win-
dow is in operation, pull up or press
down and release the switch.
The POWER button must be in the
ON position to be able to raise or
lower the windows.
Each door has a Power Window
switch to control that door's window.
The driver has a Power Window Lock
switch which can block the operation
of passenger windows. The power
windows will operate for approxi-
mately 30 seconds after the POWER
button is placed in the ACC or
LOCK/OFF position. However, if the
front doors are opened, the Power
Windows cannot be operated even
within the 30 second period.
3
To reset the power windows
If the power windows do not operate
normally, the automatic power win-
dow system must be reset as follows:
Press the window switch down to the 1. Place the POWER button to the
ON position.
switch when you want the window to 2. Close the windows and continue
pulling up on the power window
switch for at least one second.
If the power windows do not operate
properly after resetting, have the
system checked by an authorized
HYUNDAI Tucson Fuel Cell dealer.
OLMB043213
To open:
first detent position (5). Release the
WARNING
stop.
To avoid serious injury or death,
do not extend your head, arms
or body outside the windows
while driving.
To close:
Pull the window switch up to the first
detent position (5). Release the win-
dow switch when you want the win-
dow to stop.
3-25
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)