What to do in an emergency
Distributing the sealant
Checking the tire inflation
pressure
✽ NOTICE
11.
Immediately drive approximately
The pressure gauge may show high-
miles (7~10 km or, about 1. After driving approximately 4~6 er than actual reading when the
miles (7~10 km or about 10 min), compressor is running. To get an
4~6
10min)
to evenly distribute the
sealant in the tire.
Do not exceed a speed of 50 mph 2. Connect connection hose (9) of
stop at a safety location.
accurate tire reading, the compres-
sor needs to be turned off.
(80
km/h). If possible, do not fall
below a speed of 12 mph (20 km/h).
the compressor directly to the tire
valve.
- To reduce the inflation pres-
sure: Press the button 8 on the
compressor.
While driving, if you experience any 3. Plug the compressor power cord
unusual vibration, ride disturbance or
noise, reduce your speed and drive
with caution until you can safely pull
off of the side of the road.
into the vehicle power outlet.
4.
Adjust the tire inflation pressure to
the recomended tire inflation.
With the POWER button on, pro-
ceed as follows.
Call for road side service or towing.
When you use the Tire Mobility Kit,
the tire pressure sensors and wheel
may be damaged by sealant, remove
the sealant stained with tire pressure
sensors and wheel and inspect in
authorized dealer.
-
To increase the inflation pres-
sure : Switch on the compres-
sor, position I. To check the cur-
rent inflation pressure setting,
briefly switch off the compressor.
6-18
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)