Using the Tire Mobility Kit
CAUTION
1.
Detach the speed restriction label
(0) from the sealant bottle (1), and
Tire pressure
place it in a highly visible place
inside the vehicle such as on the
steering wheel to remind the driv-
er not to drive too fast.
Do not attempt to drive your
vehicle if the tire pressure is
below 29 PSI(200kpa).
could result in an accident due
to sudden tire failure.
This
2.
Screw connection hose (9) onto
the connector of the sealant bot-
tle.
3.
4.
Ensure that button (8) on the com-
pressor is not pressed.
Unscrew the valve cap from the
valve of the defective wheel and
screw filling hose (2) of the
sealant bottle onto the valve.
Insert the sealant bottle into the
housing of the compressor (4)so
that the bottle is upright.
9. Switch off the compressor.
OEL069019
10.
Detach the hoses from the
sealant bottle connector and
from the tire valve.
6.
7.
Ensure that the compressor is
switched off, position 0.
Connect between compressor and
the vehicle power outlet using the
cable and connectors.
Return the Tire Mobility Kit to its stor-
age location in the vehicle.
6
5.
8.
With the POWER button on,
switch on the compressor and let
it run for approximately 5~7 min-
utes to fill the sealant up to proper
pressure. (refer to the Tire and
Wheels, chapter 8). The inflation
pressure of the tire after filling is
WARNING
Carbon monoxide
Do not leave your vehicle run-
ning in a poorly ventilated area
for extended periods of time.
Carbon monoxide poisoning
and suffocation can occur.
unimportant
and
will
be
checked/corrected later.
Be careful not to overinflate the
tire and stay away from the tire
when filling it.
6-17
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)