✽
NOTICE
Jump starting procedure
(Continued)
An inappropriately disposed 1. Make sure the booster battery is
12-volt and that its negative termi-
nal is grounded.
•
NEVER attempt to recharge
the battery when the vehicle’s
battery cables are connected
to the battery.
battery can be harmful to
the environment and human
health. Dispose the battery
to your local
law(s) or regulation.
Pb
2.
3.
If the booster battery is in another
vehicle, do not allow the vehicles
to touch.
Turn off all unnecessary electrical
loads.
according
•
The electrical ignition system
works
with
high
voltage.
NEVER touch these compo-
nents with the engine running
or when the POWER button is
in the ON position.
CAUTION
4. First connect one end of a jumper
cable to the positive terminal of
the discharged battery in the lug-
gage room, then connect the other
end to the positive terminal on the
booster battery. Proceed to con-
nect one end of the other jumper
cable to the negative terminal of
the booster battery, then the other
end to a solid, stationary, metallic
point away from the battery (for
example, the tailgate latch). Do
not connect it to or near any part
that moves when the vehicle is
started.
To prevent damage to your vehi-
cle:
•
Only use a 12-volt power sup-
ply (battery or jumper system)
to jump start your vehicle.
Do not attempt to jump start
your vehicle by push-starting.
•
6
Do not allow the jumper cables to
contact anything except the cor-
rect battery terminals or the cor-
rect ground. Do not lean over the
battery when making connections.
6-7
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)