Maintenance
Finish damage repair
Bright-metal maintenance
Underbody maintenance
Deep scratches or stone chips in the • To remove road tar and insects, Corrosive materials used for ice and
painted surface must be repaired
promptly. Exposed metal will quickly
rust and may develop into a major
repair expense.
use a tar remover, not a scraper or snow removal and dust control may
other sharp object. collect on the underbody. If these
materials are not removed, acceler-
ated rusting can occur on underbody
parts such as the fuel lines, frame,
floor pan and exhaust system, even
though they have been treated with
rust protection.
Thoroughly flush the vehicle under-
body and wheel openings with luke-
warm or cold water once a month,
after off-road driving and at the end
of each winter. Pay special attention
to these areas because it is difficult
to see all the mud and dirt. It will do
more harm than good to wet down
the road grime without removing it.
The lower edges of doors, rocker
panels, and frame members have
drain holes that should not be
allowed to clog with dirt; trapped
water in these areas can cause rust-
ing.
•
•
To protect the surfaces of bright-
metal parts from corrosion, apply a
coating of wax or chrome preser-
vative and rub to a high luster.
During winter weather or in coastal
areas, cover the bright metal parts
with a heavier coating of wax or
preservative. If necessary, coat the
parts with non-corrosive petroleum
jelly or other protective compound.
✽
NOTICE
If your vehicle is damaged and
repair or
the vehicle
requires
replacement,
inspected
any
metal
have
authorized
Hyundai Tucson Fuel Cell dealer.
at
your
7-78
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)