programmed HomeLink button - re-
leasing when the device begins to ac-
tivate.
7. Quickly within 30 seconds of pushing
and releasing the garage door opener
program button, firmly push and re-
lease the HomeLink button you’ve
just programmed. Push and release
the HomeLink button up to three
times to complete the training.
5.
Ifthe indicator light on the HomeLink
blinks rapidly fortwoseconds andthen
turnssolid, HomeLink haspicked upa
“rolling code” garage door opener sig-
nal. You will need to proceed with the
8. Your HomeLink button should now be
programmed.
next steps to train the HomeLink
to
complete the programming which may
require aladder andanother person for
convenience.
To program the remaining HomeLink
buttons for additional door or gate
openers, follow steps 2-8 only.
6.
Push and release the training button
located on the garage door opener’s
motor to activate the “training mode”.
This button is usually located near the
antenna wire that hangs down from
the motor. If the wire originates from
under a light lens, you will need to re-
move the lens to access the training
button.
NOTE:
SIC3011
Donotrepeat step oneunless youwant to
“clear”
HomeLink buttons.
3.
4.
Using both hands, simultaneously
push and hold both the HomeLink
button you want to program and the
hand-held transmitter button.
all
previously
programmed
If you have any questions or are having
difficulty programming your HomeLink
buttons, refer to the HomeLink web site
at: www.homelink.com or call 1-800-355-
3515.
DO NOT release the buttons until step
4
has been completed.
Hold down both buttons until the indi-
cator light on the HomeLink flashes,
NOTE:
changing from a “slow blink” to a
“rapid blink”. When the indicator light
flashes rapidly, both buttons may be
released. The rapidly flashing light in-
dicates successful programming. To
activate the garage door or other pro-
grammed device, push and hold the
Once you have pushed and released the PROGRAMMING HomeLink FOR
training button on the garage door open- CANADIAN CUSTOMERS
er’s motor and the “training light” is lit,
you have 30 seconds in which to perform
step7.Usethehelpofasecond person for
convenience to assist when performing
thisstep.
Prior to 1992, D.O.C. regulations required
hand-held transmitters to stop transmit-
ting after 2 seconds. To program your
hand-held transmitter to HomeLink , con-
2-48
Instrumentsandcontrols
| Categories | Infiniti G Series Manuals, Infiniti Manuals |
|---|---|
| Tags | Coupe, Infiniti G35 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Automotive readers have rated 2006 Infiniti G35 Coupe Sedan Owners Manual 3.0 out of 3.0 based on 1 product reviews. So far, so good! Shared opinion should be after experience.