DISCOVERY
T1 ETM
BUILT IN TEST PROCEDURE
The built in test procedure is accessed as follows:
1.
Starting conditions: ignition off, doors unlocked,
bonnet switch depressed.
2.
3.
4.
5.
6.
7.
Carry out instructions 3 to 7 within 8 seconds.
Release bonnet switch.
Switch ignition ON.
Lock doors.
Switch ignition OFF.
Switch ignition ON.
If alarm is correctly accessed, horn will sound and
LED will flash. The following checks can be made:
8.
Open and close any door or tailgate – LED will
light.
9.
Depress bonnett switch – hazards will flash.
10.
Check engine cranking is disabled. Do not turn
off ignition.
11.
Check ultrasonic by operating handset, LED
will emit one 5 second flash, and will flash if
interior is disturbed.
NOTE: If ECU is in new born mode, any handset of
the right frequency will work. If not,
initialised handset is required. See Handset
Initialisation.
12.
Turn OFF ignition or press handset to end test
procedure. Horn will sound as before to
indicate end of test mode.
4
E L E C T R I C A L T R O U B L E S H O O T I N G M A N U A L
| Categories | Land Rover, Land Rover Discovery |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Electrical Troubleshooting Manual |
| Language | English |
| Product Name | Discovery |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)