How to Check Power Steering Fluid
Adding Washer Fluid
Turn the key off, let the engine compartment cool down,
wipe the cap and the top of the reservoir clean, then
unscrew the cap and wipe the dipstick with a clean rag.
Replace the cap and completely tighten it. Then remove
the cap again and look at the fluid level on the dipstick.
For the VORTEC 4300 V6 engine, the level should be
between theADD and FULL marks. For the 2200 L4engine,
the fluid level should be at the C mark. If necessary, add only
enough fluid to bring the level up to the proper range.
What to Use
To determine what kind of fluid to use, see
“Recommended Fluids and Lubricants” in the Index.
Always use the proper fluid. Failure to use the proper
fluid can cause leaks and damage hoses and seals.
Open the cap labeled WASHER FLUID ONLY with
the washer symbol on it. Add washer fluid until the
tank is full.
Windshield Washer Fluid
What to Use
When you need windshield washer fluid, be sure to read
the manufacturer’s instructions before use. If you will be
operating your vehicle in an area where the temperature
may fall below freezing, use a fluid that has sufficient
protection against freezing.
6-31
| Categories | Chevrolet Manuals, Chevrolet S10 Manuals |
|---|---|
| Document Type | Free Auto PDF Owners Manual Download |
| Tags | Chevrolet S10 4.3 |
| Model Year | 2000 |
| Download File |
|
| Document File Type | |
| Publisher | chevrolet.com |
| Wikipedia's Page | Chevrolet S-10 |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Automotive readers have rated 2000 Chevrolet S10 Owners Manual 3.0 out of 3.0 based on 1 product reviews. Glad I did not have to pay for manual
So, another good reason to keep on top of pressures. Since an average dealership sale lasts a mere 5 days, it’s imperative that a
dealership’s direct mail gets into consumers’ homes as quickly as possible.
I typically come up with some fairly wild ideas for my cars and Troy by no means says no.