Two-Piece Front Turn Signal
Lamp Assembly
1.
Remove the headlamp assembly as shown under
“Two-Piece Composite Headlamp System” earlier in
this section.
2.
Locate the locking tabs
on the assembly.
Squeeze the tabs
together and push that
end of the assembly out
while holding the tabs.
The assembly will
swing out.
4.
Turn the harness bulb socket counterclockwise to
remove it. Pull the bulb straight out to remove it
from the socket.
5.
6.
7.
Push the new bulb into the socket until it snaps
into place.
3.
Unplug the electrical connector.
Put the socket into the lamp assembly and turn it
clockwise until it is tight.
To replace the assembly, snap the outboard end of
the lamp assembly back into the vehicle. Then swing
the assembly in and snap it into place.
8.
Replace the headlamp assembly. Install the two
retaining clips.
6-40
Product Specification
Categories | Chevrolet Manuals, Chevrolet S10 Manuals |
---|---|
Document Type | Free Auto PDF Owners Manual Download |
Tags | Chevrolet S10 4.3 |
Model Year | 2000 |
Download File |
|
Document File Type | |
Publisher | chevrolet.com |
Wikipedia's Page | Chevrolet S-10 |
Copyright | Attribution Non-commercial |
Glad I did not have to pay for manual
So, another good reason to keep on top of pressures. Since an average dealership sale lasts a mere 5 days, it’s imperative that a
dealership’s direct mail gets into consumers’ homes as quickly as possible.
I typically come up with some fairly wild ideas for my cars and Troy by no means says no.