Brakes
Brake Fluid
NOTICE:
When using concentrated washer fluid,
follow the manufacturer’s instructions for
adding water.
Don’t mix water with ready-to-use washer
fluid. Water can cause the solution to freeze
and damage your washer fluid tank and
other parts of the washer system. Also,
water doesn’t clean as well as washer fluid.
Fill your washer fluid tank only
three-quarters full when it’s very cold.
This allows for expansion if freezing occurs,
which could damage the tank if it is
completely full.
Don’t use engine coolant (antifreeze) in
your windshield washer. It can damage
your washer system and paint.
Your brake master cylinder reservoir is filled with
DOT-3 brake fluid.
There are only two reasons why the brake fluid level in the
reservoir might go down. The first is that the brake fluid
goes down to an acceptable level during normal brake
lining wear. When new linings are put in, the fluid level
goes back up. The other reason is that fluid is leaking out
of the brake system. If it is, you should have your brake
system fixed, since a leak means that sooner or later your
brakes won’t work well, or won’t work at all.
6-32
Product Specification
Categories | Chevrolet Manuals, Chevrolet S10 Manuals |
---|---|
Document Type | Free Auto PDF Owners Manual Download |
Tags | Chevrolet S10 4.3 |
Model Year | 2000 |
Download File |
|
Document File Type | |
Publisher | chevrolet.com |
Wikipedia's Page | Chevrolet S-10 |
Copyright | Attribution Non-commercial |
Glad I did not have to pay for manual
So, another good reason to keep on top of pressures. Since an average dealership sale lasts a mere 5 days, it’s imperative that a
dealership’s direct mail gets into consumers’ homes as quickly as possible.
I typically come up with some fairly wild ideas for my cars and Troy by no means says no.