Wiper Blades
WIPER BLADE REPLACEMENT
Rear wiper blade
Wiper Blades
Front wiper blades
LO
CK
LOCK
H2459
Lift the wiper arm away from the windscreen.
Disconnect the blade by pushing the locking tab
(see inset in illustration) to the unlock position.
H2595
With the spare wheel removed from the
taildoor, lift the wiper arm away from the rear
screen. Pivot the blade assembly away from the
arm (as arrowed), levering against resistance,
until the two retaining lugs detach from their
slots at the end of the arm. Carefully replace the
arm to its stowed position.
Fitting a replacement blade is a reversal of this
process. Check that the blade is securely locked
before returning the wiper assembly to the
windscreen.
Only fit replacement wiper blades that are
identical to the original specification.
Grease, silicone and petrol based products
impair the blade's wiping capability. Wash the
wiper blades in warm soapy water and
periodically check their condition.
To replace, position the wiper arm into the
aperture in the middle of the blade assembly,
line up the retaining lugs with the
corresponding slots in the wiper arm and push
firmly into position until the blade clips into
place.
If signs of hardness or cracking in the rubber
are found, or if the wipers leave streaks or
unwiped areas on the windscreen during use,
then the wiper blades should be replaced.
Clean the windscreen regularly with an
approved glass cleaner and ensure the screen is
thoroughly cleaned before fitting replacement
wiper blades.
152
| Categories | Land Rover, Land Rover Discovery Series II |
|---|---|
| Tags | Land Rover |
| Model Year | 2000 |
| Download File |
|
| Language | English |
| Product Name | Dicovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)