Bulb Replacement
Headlight bulb replacement
Sidelight bulb replacement
Disconnect the electrical multi-plug and
remove the rubber cover. Release the spring
clip which holds the bulb and withdraw the
bulb from the light unit. When replacing the
bulb, ensure that the larger tab is pointing
towards the top of the headlight.
Replace the spring clip and rubber cover,
ensuring the slit in the cover is at the top of the
headlight, and pressing the centre firmly to seal
around the electrical contacts of the bulb.
NOTE: Do not touch the bulb glass with your
fingers. If necessary, clean the bulb with
methylated spirits.
Replacing the headlight unit
Replacement is a reversal of the removal
procedure. However if headlight levelling is
fitted, it is necessary to carefully align
the lower fixing position ‘B’ to the height
adjustment operating lever before fitting the
retaining clips ‘A’.
H3100
With the light unit removed (see previous
instructions), disconnect the electrical
multi-plug and disengage the bulb holder by
twisting a quarter turn anti-clockwise. Pull the
bulb from the holder to remove.
Once the retaining clips are secure, firmly push
the bottom of the headlight unit towards the
rear of the vehicle to fully engage the height
adjustment operating lever.
187
| Categories | Land Rover, Land Rover Discovery Series II |
|---|---|
| Tags | Land Rover |
| Model Year | 2000 |
| Download File |
|
| Language | English |
| Product Name | Dicovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)