Wheel Changing
Operating the jack
Positioning the jack
WARNING
A
NEVER work beneath the vehicle with the jack
as the only means of support. The jack is
designed for wheel changing only!
B
C
H2510
H2516
Slot the two parts of the jack lever together,
ensuring that the spring clip protrudes from the
engagement slot where the two parts join (see
inset ‘A’). Close the jack release valve by using
the notched end of the jack lever to turn the
valve fully clockwise (see inset ‘B’). Insert the
lever into the socket as shown (inset ‘C’) and
twist the lever to lock it into the socket.
Front jacking point
Pump the lever up and down to raise the jack.
To lower the jack, detach the lever (twist and
pull) and then slot the notched end over the
pegs on the release valve. Slowly turn the
release valve anti-clockwise allowing the weight
of the vehicle to lower the jack.
DO NOT fully unscrew the release valve.
H2515
Rear jacking point
Always position the jack from the side of the
vehicle, approximately in line with the
appropriate jacking point. Ensure the jack is
positioned on firm, level ground.
171
| Categories | Land Rover, Land Rover Discovery Series II |
|---|---|
| Tags | Land Rover |
| Model Year | 2000 |
| Download File |
|
| Language | English |
| Product Name | Dicovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)