Tyres
Tyre wear
Tread depth must be checked regularly (at
every maintenance service, or more
frequently). Always replace a tyre before the
tread reaches a remaining depth of 1.6 mm. DO
NOT drive with tyres worn to this limit, the
safety of the vehicle and occupants will be
adversely affected.
NOTE: After off-road use, check to make sure
there are no lumps or bulges in the tyres or
exposure of the ply or cord structure.
Valves
Keep the valve caps screwed down firmly - they
prevent dirt from entering the valve. Check the
valve for leaks (listen for a tell-tale hissing)
when you check the tyre pressure.
Punctured tyres
Your vehicle is fitted with tubeless tyres, which
may not leak if penetrated by a sharp object,
provided the object remains in the tyre. If you
are aware of this occurring, reduce speed
immediately and drive with caution until the
spare wheel can be fitted.
A puncture of this kind will eventually cause the
tyre to lose pressure, which is why regular (and
frequent) checking of tyre pressures is
important. Punctured or damaged tyres must
be permanently repaired or replaced as soon as
possible. DO NOT DRIVE WITH A PUNCTURED
TYRE!
H2571
Some tyres fitted as original equipment have
wear indicators moulded into the tread pattern.
When the tread has worn down to 1.6 mm (1/16
inch) the indicators start appearing at the
surface of the tread pattern, producing the
effect of a continuous band of rubber across the
width of the tyre.
A tyre MUST be replaced as soon as an
indicator band becomes visible or the tread
depth reaches the minimum permitted by
legislation.
157
| Categories | Land Rover, Land Rover Discovery Series II |
|---|---|
| Tags | Land Rover |
| Model Year | 2000 |
| Download File |
|
| Language | English |
| Product Name | Dicovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)