2000 Land Rover Dicovery Series II Owners Handbook

Bulb Replacement
BUMPER MOUNTED LIGHTS
(Fog guard lights & direction indicators)
To replace the light unit, first locate the hooks
Cin the bumper aperture and firmly push the
other side of the light against spring pressure
until it clicks into place.
C
NUMBER PLATE LIGHTS
B
A
H2522
H2499
Remove both screws to release the light unit.
Ease the light unit from its recess and pull the
bulb to remove.
WARNING
If the engine is warm, the exhaust system
may be hot - to prevent personal injury, avoid
contact with a hot exhaust system when
reaching behind the bumper.
Reach behind the bumper and press the spring
clip Ato release the light unit.
Squeeze both levers Bto release the bulb
holder from the lens. Push and twist to release
the bulbs.
NOTE: If necessary, the light unit can first be
detached from the electrical harness by
releasing the multi-plug from the rear of the
bulb holder.
Before reassembling the light unit, make sure
the seal (between holder and lens) is in place.
190
Product Specification
CategoriesLand Rover, Land Rover Discovery Series II
Tags
Model Year2000
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 215 pages
LanguageEnglish
Product NameDicovery Series II
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field