Seating and Safety Restraints
7.
Pull the lap belt portion across
the child seat toward the buckle and
pull up on the shoulder belt while
pushing down with your knee on the
child seat.
8.
Allow the safety belt to retract to
remove any slack in the belt.
9.
Before placing the child in the
seat, forcibly tilt the seat forward
and back to make sure the seat is
securely held in place. To check
this, grab the seat at the belt path
and attempt to move it side to side
and forward and back. There should
be no more than one inch of
movement for proper installation.
10.
Try to pull the belt out of the retractor to make sure the retractor is
in the automatic locking mode (you should not be able to pull more belt
out). If the retractor is not locked, unbuckle the belt and repeat steps
two through nine.
Check to make sure the child seat is properly secured before each use.
Installing child safety seats in the lap belt seating positions
1.
Lengthen the lap belt. To lengthen the belt, hold the tongue so that its
bottom is perpendicular to the direction of webbing while sliding the
tongue up the webbing.
2.
3.
Place the child safety seat in the center seating position.
Route the tongue and webbing through the child seat according to the
child seat manufacturer’s instructions.
4.
position until you hear a snap and feel it latch. Make sure the tongue is
securely fastened to the buckle by pulling on tongue.
Insert the belt tongue into the proper buckle for the center seating
5.
Push down on the child seat while pulling on the loose end of the lap
belt webbing to tighten the belt.
130
| Categories | Ford Manuals, Ford Taurus Manuals |
|---|---|
| Model Year | 2002 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 5 out of 5)
Automotive readers have rated 2002 Ford Taurus Owners Manual 5.0 out of 5.0 based on 2 product reviews. Just like the one that came in the glove box.