Maintenance and Specifications
Note: The 3.0L V6 Vulcan engine
may have a different type power
steering fluid reservoir that uses a
dipstick to check fluid level. With
this application, the fluid should be
between the arrows in the FULL
HOT range. Do not add fluid if the
level is within this range. Refer to
IdentifyingComponentsinthe
EngineCompartment for different
reservoir locations in this chapter.
5.
If the fluid is low, add fluid in small amounts, continuously checking
the level until it reaches the range between the MIN and MAX
lines(FULL HOT range with dipstick type reservoir). Be sure to put the
cap back on the reservoir.
BRAKE FLUID
Checking and adding brake fluid
Brake fluid should be checked and
refilled as needed. Refer to the
scheduled maintenance guide for
the service interval schedules.
1.
Clean the reservoir cap before
removal to prevent dirt or water
from entering the reservoir.
2.
3.
Visually inspect the fluid level.
If necessary, add brake fluid from
a clean un-opened container until
the level reaches MAX. Do not fill
above this line.
4.
Use only a DOT 3 brake fluid
certified to meet Ford specification ESA-M6C25–A. Refer toLubricant
specifications in this chapter.
217
| Categories | Ford Manuals, Ford Taurus Manuals |
|---|---|
| Model Year | 2002 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 5 out of 5)
Automotive readers have rated 2002 Ford Taurus Owners Manual 5.0 out of 5.0 based on 2 product reviews. Just like the one that came in the glove box.