J94S.book Page 11 Saturday, June 23, 2001 1:04 PM
Maintenance and Care
Owner Maintenance
wInspecting Engine Oil Level
CAUTION
1.
2.
3.
4.
Be sure the vehicle is on a level
surface.
Don’t add engine oil over F. This may
cause engine damage.
Warm up the engine to normal
operating temperature.
6.
Make sure the O-ring is positioned
properly before reinserting the
dipstick.
Turn it off and wait 5 minutes for the
oil to return to the oil pan.
Pull out the dipstick, wipe it clean, and
reinsert it fully.
The distance between L and F on the
dipstick represents the following:
2.0-liter engine
L (US qt, Imp qt)
1.0 (1.06, 0.88)
wChanging Engine Oil and Filter
Change engine oil and filter according to
Scheduled Maintenance (page 8-3).
Full
OK
Please act responsibly—protect the
environment and take used oil to a
recycling facility. Ask your dealer or a
service station for information.
Low
2.5-liter engine
WARNING
Handling Used Engine Oil:
Continuous contact with used engine
oil is dangerous. It could cause skin
cancer. Always wash with soap and
water immediately after changing oil
and filter.
Full
OK
Low
5.
Pull it out again and examine the level.
It’s OK between L and F.
But if it’s near at or below L, add
enough oil to bring the level to F.
8-11
Form No. 8Q50-EA-01G
| Categories | Mazda 626 Manuals |
|---|---|
| Model Year | 2002 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)