J94S.book Page 12 Saturday, June 23, 2001 1:04 PM
Maintenance and Care
Owner Maintenance
Changing engine oil
3. Replace the plug tightly after the oil
has thoroughly drained.
WARNING
4.
Fill the engine with new oil to the F
mark on the dipstick.
Checking or Changing Engine Oil:
Hot engine oil is dangerous. If the
engine has been running, the engine
oil becomes very hot. You could be
seriously burned. Don’t check or
change the engine oil when the
engine is hot.
5.
6.
Securely replace the oil-filler cap.
Start the engine and inspect around the
drain plug for leaks.
7.
Turn it off and wait 5 minutes for the
oil to return to the oil pan.
Check the oil level and fill to the F mark if
necessary.
2.0-liter engine
Tighten
Loosen
Oil capacity (General reference only,
refer to Specifications section for
capacities.)
Oil-filler cap
NOTE
•
The indicated engine oil capacities
are for general reference purposes
only. When adding or changing oil,
verify the engine oil level with the
oil dipstick.
Drain plug
2.5-liter engine
Oil-filler cap
•
Use only specified engine oil (page
10-4).
Changing oil filter
Loosen
Tighten
Because you need a special tool to
retighten the filter, an Authorized Mazda
Dealer should do the work.
Drain plug
1.
2.
Warm up the engine for a few minutes
and turn it off. Remove the oil-filler
cap.
Remove the drain plug and drain the oil
into a suitable container.
8-12
Form No. 8Q50-EA-01G
Product Specification
Categories | Mazda 626 Manuals |
---|---|
Model Year | 2002 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |