2002 Mazda 626 Owners Manual

J94S.book  Page  14  Saturday, June 23, 2001   1:04 PM
Maintenance and  Care
Owner Maintenance
For mixture percentage:
1. Remove the cooling system cap.
2.0-liter engine
Volume
Cooling system cap
Protection
Antifreeze
solution
Water
65%
55
Loosen
Tighten
Above 16°C
(3°F)
35%
45
Above 26°C
(15°F)
Above 40°C
(
55
45
40°F)
Loosen
Drain plug
To change coolant
Tighten
WARNING
2.5-liter engine
Tighten
Removing the Cooling System Cap:
Removing the cooling system cap or
drain plug while the engine is
running or hot is dangerous. This
might lead to cooling system and
engine damage and could result in
serious injury from escaping hot
coolant or steam. Turn off the engine
and wait until it’s cool. Even then, be
very careful when removing the cap
or drain plug. Wrap a thick cloth
around it and slowly turn it
counterclockwise to the first stop.
Step back while the pressure escapes.
When you’re sure all the pressure is
gone, press down on the cap — still
using a cloth — turn the cap, and
remove it.
Loosen
Cooling system cap
Loosen
Tighten
Drain plug
2.
3.
4.
Only when the engine is cool, loosen
the radiator drain plug and drain the
coolant into a suitable container.
With the drain plug loose but not fully
removed, flush out the system with
running water.
Drain the system completely and
retighten the plug.
8-14
Form No. 8Q50-EA-01G
Product Specification
CategoriesMazda 626 Manuals
Model Year2002
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 250 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field