J94S.book Page 23 Saturday, June 23, 2001 1:04 PM
Maintenance and Care
Owner Maintenance
1.
Raise the wiper arm and turn the blade
assembly to expose the plastic locking
clip.
3. Remove the metal stiffeners from the
blade rubber and install them in new
blades.
Compress the clip and slide the
assembly downward; then lift it off the
arm.
Push
Stiffeners
CAUTION
Plastic locking clip
•
•
Don’t bend the stiffeners. You need
to use them again.
CAUTION
If the metal stiffeners are switched,
the blade’s wiping efficiency could
be reduced.
To prevent damage to the windshield,
don’t let the wiper arm fall on it.
So don’t use the driver’s side metal
stiffeners on the passenger’s side, or
vice versa.
2.
Hold the end of the rubber and pull
until the tabs are free of the metal
support.
•
Be sure to reinstall the metal
stiffeners in the new blade rubber so
that the curve is the same as it was
in the old blade rubber.
Metal support
pull out
Tabs
8-23
Form No. 8Q50-EA-01G
Product Specification
Categories | Mazda 626 Manuals |
---|---|
Model Year | 2002 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |