IN CASE OF EMERGENCY
G290B02P-AAT
Adjustment After Headlight Assembly
Replacement
"H";
Horizontal center line of headlights from
ground.
E130D01P-GAT
Front combination lamps
Minbus/Van
MINIBUS
2WD:849 mm (33.43 in.)
4WD:972 mm (38.27 in.)
VAN(2WD) : 855 mm (33.66 in.)
3
Horizontal line
0mm(1.18in.)
Vertical
line
W
15mm
(0.59in.)
TRUCK
Long Wheel base
:847 mm (33.35 in.)
"P"
Extra long Wheel base
:845 mm (33.27 in.)
H
Cut-off line
"W";
Ground line
Distance between each headlight center.
MINIBUS/VAN(2WD/4WD)
:1300mm (51.18 in.)
L
H
E130A01P-1
G290B01Y
Truck (Long wheel base/Extra long
wheel base) : 1272 mm (50.08 in.)
Truck
If the vehicle has had front body repair and the
headlight assembly has been replaced, the head-
light aiming should be checked using the aiming
screen as shown in the illustration. Turn on the
headlight switch. (Low Beam Position)
"L";
Distance between the headlights and the
wall that the lights are tested against
:
3,000 mm (118.11 in.).
1.
Adjust headlights so that main axis of light is
parallel to center line of the body and is
aligned with point "P" shown in the illustra-
tion.
2.
Dotted lines in the illustration show center of
headlights.
E130C01P-1
Remove the bezel attaching screw from the
front combination lamp.
Then turn the bulb socket counterclockwise to
remove it.
To remove the bulb of the side turn-signal
lamps, turn the bulb counterclockwise while
pressing it inward.
4-18
| Categories | Hyundai Manuals, Hyundai H-1 Grand Starex Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Grand Starex |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)