INSTRUMENTS & CONTROLS
H290B01P-GAT
3. TREBLE/FAD Knob
5. PRESET STATION Select Buttons
Six (6) stations for AM, FM and FM2 respec-
tively can be preset in the electronic memory
circuit.
1.
POWER ON-OFF Control Knob
TREBLE Control Knob
Press to pop the knob out and turn to the left or
right for the desired treble tone.
The radio unit may be operated when the igni-
tion key is in the "ACC" or "ON" position. Press
the button to switch the power on. The display
shows the radio frequency in the radio mode or
the tape direction indicator in the tape mode, or
CD track either the CD mode or CD AUTO
CHANGER mode. To switch the power off,
press the button again.
HOW TO PRESET STATIONS
FAD (Fader Control) Knob (Minibus
Six AM and twelve FM stations may be pro-
grammed into the memory of the radio. Then,
by simply pressing the band select button and/
or one of the six station select buttons, you may
recall any of these stations instantly. To pro-
gram the stations, follow these steps:
only)
Further pull the popped-up knob. Turn the con-
trol knob counterclockwise to emphasize front
speaker sound. (Rear speaker sound will be
attenuated) When the control knob is turned
clockwise, rear speaker sound will be empha-
sized. (Front speaker sound will be attenuated)
VOLUME Control
Rotate the knob clockwise to increase the vol-
ume and turn the knob counterclockwise to
reduce the volume.
o
o
o
o
Press band selector to set the band for AM,
FM and FM2.
Select the desired station to be stored by
seek or manual tuning.
4.
TUNE (Manual) Select Button
2.
BASS/BALANCE Control Knob
Press the ( ) side or ( ) side to increase or to
decrease the frequency. With the button held
down for 0.5 sec. or more, the stop signal
(broadcasting radio wave) is ignored and chan-
nel selection continues.
BASS Control Knob
Determine the preset station select button
you wish to use to access that station.
Press the station select button for more than
two seconds. A select button indicator will
show in the display indicating which select
button you have depressed. The frequency
display will flash after it has been stored into
the memory with beep sound. You should
then release the button, and proceed to
program the next desired station. A total of
Press to pop the knob out. To increase the
bass, rotate the knob clockwise, while to de-
crease the bass, rotate the knob counterclock-
wise.
SEEK Operation (Automatic Channel
Selection)
BALANCE Control knob
Press the TUNE select button for 1 sec or
more, and releasing will automatically tune the
next available station with beep sound.
When the ( ) side is pressed longer than 1
second and releasing will automatically tune
Further pull the popped-up knob. Rotate the
knob clockwise to emphasize right speaker
sound. (Left speaker sound will be attenuated)
When the control knob is turned counterclock-
wise, left speaker sound will be emphasized
(Right speaker sound will be attenuated).
18
stations can be programmed by selecting
one AM and two FM station per button.
When completed, any preset station may be
recalled by selecting AM, FM or FM2 band
and the appropriate station button.
o
the next higher frequency and when the (
)
side is pressed longer than 1 second and re-
leasing will automatically tune the next lower
frequency.
2-49
| Categories | Hyundai Manuals, Hyundai H-1 Grand Starex Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Grand Starex |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)