PREVENTIVE
MAINTENANCE
G080A01P-GAT
EXPLANATION
MAINTENANCE
G080D01P-GAT
G080F01P-GAT
o Fuel hose, vapor hose and fuel
filler cap
The fuel hose, vapor hose and fuel filler cap
should be inspected at those intervals specified
in the maintenance schedule. Make sure that a
new fuel hose, vapor hose or fuel filler cap is
correctly replaced. Consult your Hyundai dealer
if you have any questions.
OF
ITEMS
SCHEDULED
o Fuel filter
A clogged filter can limit the speed at which the
vehicle may be driven, damage the emission
system and cause hard starting. If an exces-
sive amount of foreign matter accumulates in
the fuel tank, the filter may require replacement
more frequently.
After installing a new filter, run the engine for
several minutes, and check for leaks at the
connections.
o Engine oil and filter
The engine oil and filter should be changed at
those intervals specified in the maintenance
schedule. If the vehicle is being driven in se-
vere conditions, more frequent oil and filter
changes are required.
G080G01P-GAT
o Air cleaner filter
A genuine Hyundai part is recommended for
replacement of the air cleaner filter.
G080B01P-GAT
o Valve clearances (DIESEL)
G080E01P-GAT
o Vacuum and crankcase
ventilation hoses
An incorrect valve clearance will not only result
in rough engine operation, but will also cause
excessive noise and reduced engine output.
Inspect valve clearance and adjust as required
while the engine is hot.
G080H01P-GAT
Inspect the surface of hoses for evidence of
heat and/or mechanical damage. Hard and
brittle rubber, cracking, tears, cuts, abrasions,
and excessive swelling indicate deterioration.
Particular attention should be paid to examining
those hose surfaces nearest to high heat
sources, such as the exhaust manifold.
Inspect the hose routing to assure that the
hoses do not come in contact with any heat
source, sharp edges or moving component
which might cause heat damage or mechanical
wear. Inspect all hose connections, such as
clamps and couplings, to make sure they are
secure, and that no leaks are present. Hoses
should be replaced immediately if there is any
evidence of deterioration or damage.
o Spark plugs
Make sure to install new spark plugs of the
correct heat range.
Valve-to-rocker arm clearance:
G080I01P-GAT
DIESEL:
Hot ............................ 0.25 mm (0.0098 in.)
Cold ............................ 0.15 mm (0.0059 in.)
o Drive belts
Inspect all drive belts (water pump and alterna-
tor) for evidence of cuts, cracks, excessive
wear or oiliness, and replace if necessary.
Drive belts should be checked periodically for
proper tension and adjusted as necessary.
G080C01P-GAT
o Fuel lines and connections
Check the fuel lines and connections for leak-
age and damage. Replace any damaged or
leaking parts immediately.
6-9
| Categories | Hyundai Manuals, Hyundai H-1 Grand Starex Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Grand Starex |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)