INSTRUMENTS & CONTROLS
H260B02E-AAT
3. BASS Control Knob
Press to pop the knob out and turn to the left or
right for the desired bass tone.
6. BAND Selector
1.
POWER ON-OFF Control Knob
Pressing the FM/AM button changes the AM, FM1
and FM2 bands. The mode selected is dis-
played on LCD.
The radio unit may be operated when the igni-
tion key is in the "ACC" or "ON" position. Press
the knob to switch the power on. The LCD
shows the radio frequency in the radio mode or
the CD track indicator in either the CD mode or
CD AUTO CHANGER mode. To switch the
power off, press the knob again.
TREB (Treble Control) Knob
Pull the bass control knob further out. Turn to
the left or right for the desired treble tone.
7. PRESET STATION SELECT Button
Six (6) stations for AM, FM or FM2 respectively
can be preset in the electronic memory circuit
on this unit.
4.
SCAN Button
When the scan button is pressed, the fre-
quency will increase and the receivable sta-
tions will be tuned in one after another, receiv-
ing each station for 5 seconds. To stop scan-
ning, press the scan button again.
VOLUME Control
HOW TO PRESET STATIONS
Rotate the knob clockwise to increase the vol-
ume and turn the knob counterclockwise to
reduce the volume.
Six AM and twelve FM stations may be pro-
grammed into the memory of the radio. Then,
by simply pressing the band select button and/
or one of the six station select buttons, you may
recall any of these stations instantly. To pro-
gram the stations, follow these steps:
BALANCE Control
5.
TUNE (Manual) Select Button
Pull and turn the control knob clockwise to
emphasize right speaker sound (Left speaker
sound will be attenuated). When the control
knob is turned counterclockwise, left speaker
sound will be emphasized. (Right speaker sound
will be attenuated)
Press the ( ) side or ( ) side to increase or to
decrease the frequency. Press either button
and hold down to continuously scroll. Release
button once the desired station is reached.
o
o
o
o
Press band selector to set the band for AM,
FM or FM2.
Select the desired station to be stored by
seek, scan or manual tuning.
Determine the preset station select button
you wish to use to access that station.
Press the station select button for more than
two seconds. A select button indicator will
show in the display indicating which select
button you have depressed. The frequency
display will flash after it has been stored into
the memory.
SEEK Operation (Automatic Channel
2. FAD (Fader Control) Knob
Selection)
Turn the control knob counterclockwise to em-
phasize front speaker sound. (Rear speaker
sound will be attenuated) When the control
knob is turned clockwise, rear speaker sound
will be emphasized. (Front speaker sound will
be attenuated)
Press the TUNE select button for 0.5 sec or
more, and releasing will automatically tune the
next available station with beep sound.
When the ( ) side is pressed longer than 0.5
second and releasing will automatically tune
the next higher frequency and when the (
)
side is pressed longer than 0.5 second and
releasing will automatically tune the next lower
frequency.
2-42
| Categories | Hyundai Manuals, Hyundai H-1 Grand Starex Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Grand Starex |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)