BEFORE DRIVING YOUR VEHICLE
B350A01P-GAT
B170A04A-AAT
WARNING:
MAKING A FLAT SEAT (If installed)
By removing the headrestraints and fully reclin-
ing the seatbacks of the front, second and third
seats, one large flat seat is achieved.
HEIGHT ADJUSTABLE FRONT SEAT
o
The height adjuster must be in the locked
position whenever the vehicle is moving.
The misadjustment of height of the shoul-
der belt could reduce the effectiveness
of the seat belt in a crash.
SHOULDER BELT (If installed)
o
CAUTION:
o
B360A01P-GAT
To make a flat seat, stop the vehicle in a
safe place.
SEAT BELTS
To protect you and your passengers in the
event of an accident, it is most important that
the seat belts be worn correctly when you drive.
o
Do not walk around on top of the seats
after they have been laid flat. To avoid
loosing your footing, step on the center
of the seats and walk slowly.
B370A01P-GAT
o
o
o
To ensure the seats are locked securely,
attempt to move them back and forth.
Do not jump on, or impact the seatbacks
heavily.
Never drive with the luggage or passen-
gers on the flat seat. This is highly dan-
gerous if heavy braking is required.
To raise the seatback, sit on the seat and
put a hand on the seatback and raise
slowly. Never have a child do this opera-
tion, or an unexpected accident may be
caused.
Seat belts
3-point system with Emergency
Locking Retractor
AX10200A
You can adjust the height of the front shoulder
belt anchor to one of the 4 positions.
If the height of the adjusting seat belt is too near
your neck, you will not be getting the most
effective protection. The shoulder portion should
be adjusted so that it lies across your chest and
midway over your shoulder nearest the door
and not your neck.
To adjust the height of seat belt anchor, lower
or raise the height adjuster into an appropriate
position. To raise the height adjuster, pull it up.
To lower it, push it down while pressing the
height adjuster button.
o
YR10301B
Release the button to lock the anchor into
position. Try sliding the release button to make
sure that it has locked into the position.
This type of belt requires no length adjustment.
Once worn, the belt adjusts itself to the move-
ment of wearer, but in the event of a sudden or
strong shock, the belt automatically locks to
hold to wearer’s body.
1-23
| Categories | Hyundai Manuals, Hyundai H-1 Grand Starex Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Grand Starex |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)