CONTROLS AND EQUIPMENT
B070E02HP-GAT
B060A03L-DAT
Replacing the battery
POWER WINDOWS
Hole
When the transmitter's battery begins to get
weak, it may take several pushes on the button
to lock or unlock the doors, and the LED will not
light. Replace the battery as soon as possible.
(1)
Battery type : CR1616
Replacement instructions:
Battery
Battery cover
HMXOM033-3
(2)
2.
Take off the battery cover after separating
the transmitter.
B060A01HP.DAG
3
. Remove the old battery from the transmitter
with a blade screwdriver inserted in the hole
and note the polarity. Make sure the polarity
of the new battery is the same(+side facing
up), then insert it in the transmitter.
The power windows operate when the ignition
key is in the "ON" position. The main switches
are located on the driver's armrest and control
the front and rear windows on both sides of the
vehicle. The windows may be opened by de-
pressing the appropriate window switch and
closed by pulling up the switch. To open the
window on the driver's side, press the switch(1)
halfway down. The window moves as long as
the switch is operated. To fully open the driver's
window automatically, press the switch fully
down. In automatic operation, the window will
fully open even if you let go of the switch. To
stop at the desired opening, pull up and re-
lease the switch. In order to prevent operation
of the passanger front and rear windows, a
window lock switch(2) is provided on the arm-
rest of the driver's door. To disable the power
windows, press the window lock switch. To
Case
Transmitter
HMXOM033-2
1
. Carefully separate the case with a phillips
screwdriver.
1-
9
| Categories | Hyundai Manuals, Hyundai Terracan Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Terracan |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)