CONTROLS AND EQUIPMENT
B230C02HP-EAT
B230D03E-EAT
Securing a Child Restraint System
Securing a Child Restraint System
with "Tether Anchorage" System
Three child restraint hook holders are located
on the floor behind the rear seat.
with "ISOFIX" System and "Tether An-
chorage" System
Install the child restraint seat according to the
instructions provided as following.
Child Restraint
Tether anchor cover Hook Holder
Child
Restraint
Hook holders
B230F02HP-D
Tether strap
hook
ISOFIX is a standardised method of fitting child
seats that eliminates the need to use the stan-
dard adult seat belt to secure the seat in the
vehicle. This enables a much more secure and
positive location with the added benefit of easier
and quicker installation.
Hole
B230C01HP
1.
2.
Open the tether anchor cover on the floor
behind the rear seat with the key inserted in
the hole.
Route the child restraint seat strap over the
seatback.
Front of Vehicle
B230B01HP-1
An ISOFIX-seat can only be installed if it has
vehicle-specific approval in accordance with
the requirements of ECE-R44. For your Hyundai,
the Hyundai ISOFIX GR1 / Hyundai Duo /
Römer ISOFIX GR1 and the Römer Duo ISOFIX
For vehicles with adjustable headrests, route
the tether strap under the headrest and
between the headrest posts, otherwise route
the tether strap over the top of the seatback.
3. Connect the tether strap hook to the child
restraint hook holder and tighten to secure
the seat.
/
Britax Duo ISOFIX is approved according to
the requirement ECE-R44. This seat has been
tested extensively by Hyundai and is recom-
mended for your Hyundai.
1-
22
| Categories | Hyundai Manuals, Hyundai Terracan Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Terracan |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)