Controls in detail
Good visibility
Windshield wipers
Headlamp cleaning system
!
To prevent the windshield wipers from
being damaged, do not leave the wiper
switch in intermittent setting when the
vehicle is taken to an automatic car
wash or when cleaning the windshield.
Information on the windshield wipers is
found in the “Getting started” section
The switch is located on the left side of the
dashboard.
(
୴ page 47).
i
Intermittent wiping is interrupted when
the vehicle is at a standstill and a front
door is opened.
The switch should not be left in inter-
mittent setting as the wipers will wipe
the windshield once every time the en-
gine is started. Dust that accumulates
on the windshield might scratch the
glass when wiping occurs on a dry
windshield.
A rain sensor automatically controls the
windshield wipers depending on how wet
the windshield is.
1
Headlamp washer switch
Switch on ignition.
̈
̈
Switch on ignition.
i
̈
Set the wiper switch to position I
If intermittent wiping is on and you turn
the key in the steering lock from posi-
tion 1 to position 2 (୴ page 31) and
keep the key in that position longer
than 2 seconds, the wipe interval will
be set to approx. 5 seconds.
(
୴ page 47).
̈ Press switch 1.
After the initial wipe, pauses between
wipes are automatically controlled by the
rain sensor which monitors the wetness of
the windshield.
154
| Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz CL500, Mercedes-Benz CL55 AMG, Mercedes-Benz CL600, Mercedes-Benz W215 |
| Model Year | 2003 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 5 out of 5)
Automotive readers have rated 2003 Mercedes-Benz CL500 CL600 CL55 AMG Owners Manual 5.0 out of 5.0 based on 3 product reviews.