Controls in detail
Useful features
Canadian programming
Operating the remote control
Erasing the remote control memory
During programming, your hand-held
transmitter may automatically stop trans-
mitting.
̈ Turn key in starter switch to position 1 ̈ Turn key in ignition to position 1 or 2.
or 2.
̈
Simultaneously hold down the left and
right side buttons for approximately
20 seconds, or until the indicator lamp
blinks rapidly.
̈
Select and press the appropriate but-
ton to activate the remote controlled
device.
̈
Continue to press and hold the inte-
grated remote control transmitter but-
ton (refer to steps two through four in
the “Programming” portion) while you
repeatedly press (“cycle”) your
hand-held transmitter every two sec-
onds until the frequency signal has
been learned.
The integrated remote control trans-
mitter continues to send the signal as
long as the button is pressed – up to
The codes of all three channels are
erased.
i
If you sell your vehicle, erase the codes
of all three channels.
20
seconds.
Upon successful training, the indicator
lamp will flash slowly and then rapidly
after several seconds.
220
| Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz CL500, Mercedes-Benz CL55 AMG, Mercedes-Benz CL600, Mercedes-Benz W215 |
| Model Year | 2003 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 5 out of 5)
Automotive readers have rated 2003 Mercedes-Benz CL500 CL600 CL55 AMG Owners Manual 5.0 out of 5.0 based on 3 product reviews.