Practical hints
Replacing bulbs
Replacing bulbs for front lamps
̈ Insert the new bulb so that the base lo-
cates in the recess on the holder.
G
̈
From below, press connector 2 with
bulb upward onto the reflector.
Warning!
Do not remove the cover for the Bi-Xenon
headlamp. Because of high voltage in xenon
lamps, it is dangerous to replace the bulb or
repair the lamp and its components. We rec-
ommend that you have such work done by a
qualified technician at an authorized Mer-
cedes-Benz Center.
̈ Align housing cover 1 and click into
place.
Front turn signal bulb
̈
̈
̈
Switch off the lights.
2 Electrical connector for high beam
Open the hood (୴ page 237).
flasher housing bulb
3
4
5
Parking and standing lamp
Bulb socket for turn signal lamp
Low beam and high beam (Bi-Xenon)
housing cover
Twist bulb socket 4 counterclockwise
and pull out.
̈
Push bulb into socket, turn counter-
clockwise and remove.
High beam flasher bulb
̈ Insert new bulb in socket, push in and
twist clockwise.
̈
̈
̈
Switch off the lights.
̈
Reinsert bulb socket in lamp and twist
clockwise.
Open the hood (୴ page 237).
Press ends of housing cover 1 tab to-
gether and remove cover.
1
Housing cover for high beam flasher
bulb, parking and standing lamp
̈
̈
Press connector 2 downward.
Remove connector 2 with the bulb.
304
| Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz CL500, Mercedes-Benz CL55 AMG, Mercedes-Benz CL600, Mercedes-Benz W215 |
| Model Year | 2003 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 5 out of 5)
Automotive readers have rated 2003 Mercedes-Benz CL500 CL600 CL55 AMG Owners Manual 5.0 out of 5.0 based on 3 product reviews.