Operation
Engine compartment
Checking the engine oil level with the
control system
One of the following messages will sub-
sequently appear in the indicator:
Other display messages
If the key is not turned to position 2 in the
starter switch, the following message will
appear:
You can check the engine oil level on the
multifunction display.
ț ENGINE OIL LEVEL
OK
FOR ENGINE OIL LEVEL
SWITCH ON IGNITION!
̈
Turn the key in the starter switch to
ț ADD 1.0 QT. TO
REACH MAX. OIL LEVEL!
(Canada: 1.0 LITER)
position 2.
̈ Switch on the ignition.
The standard display (୴ page 122) should
appear in the multifunction display.
ț ADD 1.5 QTS. TO
REACH MAX. OIL LEVEL!
(Canada: 1.5 LITERS)
If you see the message:
OBSERVE WAITING PERIOD
̈
Press buttonk or j on the
steering wheel until the following mes-
sage is seen in the multifunction dis-
play:
̈ Wait five minutes before repeating
check procedure.
ț ADD 2.0 QTS. TO
REACH MAX. OIL LEVEL!
(Canada: 2.0 LITERS)
If you see the message:
ENGINE OIL LEVEL
NOT WHEN ENGINE ON!
ENGINE OIL LEVEL
MEASURING NOW
MEASURE. CORRECT
ONLY IF VEH. LEVEL
̈ If necessary, add engine oil.
For adding oil see (୴ page 241).
̈ Turn off the engine. If engine is at nor-
mal operating temperature, wait five
minutes before checking oil. If the en-
gine is not yet at normal operating tem-
perature, you must wait 30 minutes
before checking oil.
୴୴
239
| Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz CL500, Mercedes-Benz CL55 AMG, Mercedes-Benz CL600, Mercedes-Benz W215 |
| Model Year | 2003 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 5 out of 5)
Automotive readers have rated 2003 Mercedes-Benz CL500 CL600 CL55 AMG Owners Manual 5.0 out of 5.0 based on 3 product reviews.