2004 Hyundai Coupe Owners Manual

WHAT TO DO IN AN EMERGENCY
D060H02A-AAT
D060I01E-GAT
7.
Re-install Wheel Nuts
8. Lower Vehicle and  Tighten Nuts
STA3071H
WARNING:
D060H01GK
HGK194
Wheels and wheel  covers may have sharp
edges. Handle them carefully to avoid pos-
sible severe injury. Before putting the wheel
intoplace,besurethatthereisnothingonthe
hub or wheel (such as mud, tar, gravel, etc.)
that  interferes with  the wheel  from  fitting
solidly against the hub. If there is, remove it.
If there is not good contact on the mounting
surfacebetweenthewheelandhub,thewheel
nutscouldcomelooseandcausethelossof
awheel.Lossofawheelmayresultinlossof
control of the vehicle. This may cause seri-
ous injury or death.
Toreinstallthewheel,holditonthestuds,putthe
wheel nuts on the studs and tighten them finger
tight.Thenutsshouldbeinstalledwiththeirsmall
diameter ends directed inward. Jiggle the tire to
be sure it is completely seated, then tighten the
nutsasmuchaspossiblewithyourfingersagain.
Lowerthecartothegroundbyturningthewheel
nutwrenchcounterclockwise.Thenpositionthe
wrench as shown in the drawing and tighten the
wheel nuts. Be sure the socket is seated com-
pletely over the nut. Do not stand on the wrench
handleoruseanextensionpipeoverthewrench
handle.
Go around the wheel tightening every other nut
until they are all tight. Then double-check each
nut for tightness. After changing wheels, have a
technician tighten the wheel nuts to their proper
torque as soon as possible.
Wheel nut tightening  torque:
Steel wheel & aluminium alloy wheel:
900-1,100 kg.cm,100 kg.cm (65-80 lb.ft)
3-7
Product Specification
Categories Hyundai Manuals, Hyundai Coupe Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 389 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Coupe
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field