IN CASE OF EMERGENCY
3
9
D060G02Y-EAT
6. Changing Wheels
!
WARNING:
Do not get under the car when it is
supported by the jack! The jack is
solely designed for wheel chang-
ing and is not intended to support
the vehicle for other purposes. The
use of purpose designed supports
is necessary whilst the vehicle is
raised and the operator is required
to get underneath.
D060G02GK
HGK4031
!
Loosen the wheel nuts and remove
them with your fingers. slide the wheel
off the studs and lay it flat so it cannot
rollaway. Toputthewheelonthehub,
pickupthesparetyre,lineuptheholes
with the studs and slide the wheel onto
them. If this is difficult, tip the wheel
slightly and get the top hole in the
wheel lined up with the top stud. Then
jigglethewheelbackandforthuntilthe
wheel can be slid over the other studs.
WARNING:
Wheels and wheel cover may have
sharp edges. Handle them carefully
to avoid possible severe injury.
Before putting the wheel into place,
be sure that there is nothing on the
hub or wheel (such as mud, tar,
gravel, etc.) that interferes with the
wheel from fitting solidly against
the hub. If there is, remove it. If
there is not good contact on the
mounting surface between the
wheelandhub,thewheelnutscould
come loose and cause the loss of a
wheel.Lossofawheelmayresultin
loss of control of the vehicle. This
may cause serious injury or death.
Product Specification
Categories | Hyundai Manuals, Hyundai Coupe Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Coupe |
Document File Type | |
Copyright | Attribution Non-commercial |