3
IN CASE OF EMERGENCY
10
D060H02Y-EAT
7. Reinstall Wheel Nuts
SD070J1-E
8. Lower Vehicle and Tighten
Nuts
Go around the wheel tightening every
other nut until they are all tight. Then
double-check each nut for tightness.
After changing wheels, have a techni-
cian tighten the wheel nuts to their
proper torque as soon as possible.
Wheel nut tightening torque
Steel wheel & aluminium alloy wheel:
90-110 Nm. (65-80 lb.ft)
D060H01GK
To reinstall the wheel hold it on the
studs put the wheel nuts on the studs
and tighten them finger tight. The nuts
should be installed with their small
diameter ends directed inward. Jiggle
the tyre to be sure it is completely
seated, then tighten the nuts as much
as possible with your fingers again.
HGK4014
Lower the car to the ground by turning
the wheel nut wrench counterclock-
wise. Then position the wrench as
shown in the drawing and tighten the
wheelnuts.Besurethesocketisseated
completely over the nut. Do not stand
on the wrench handle or use an exten-
sion pipe over the wrench handle.
| Categories | Hyundai Manuals, Hyundai Coupe Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Coupe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)