OWNERMAINTENANCE
6
CHECKING BRAKE PEDAL
CLEARANCE
CHECKING ENGINE DRIVE
BELTS
27
G180A01A-EAT
YG190A1-E
2.7L
Power steering
1.6L
Water Pump Pulley
Auto tensioner
0.2~0.24 in.
(5.1~6 mm)
A/C
comp.
1.78
(45.1
in.
mm)
Alternator
Pulley
Generator
Crankshaft pulley
G190A02B
Pulley Crankshaft Pulley
HTB186
G180A01L
If a belt is loose, adjust it by:
You need a helper to check the brake
pedal clearance. With the engine run-
ning, have your helper press down on
the brake pedal several times and
then hold it down with a force of about
2
.0L
Power
steering
1.
2.
3.
Loosen the adusting bolts just
enough so that the components
can be moved.
Whilst pulling outward on the pry
bar or screw driver, test the belt
deflection with your thumb.
After tightening the adjusting bolts,
be sure to recheck the belt tension.
Overtightening drive belts can
cause excessive wear and failure
in driven components and belts.
A/C
comp.
Water pump
pulley
490N
(50 kg, 110 lbs). The brake
pedal clearance is the distance from
the top surface of the brake pedal to
the asphalt sheeting under the floor
mat. If the brake pedal clearance is
not within the limits specified in the
illustration, have it inspected by your
Hyundai dealer and adjusted or re-
paired if necessary.
Generator
Tension
pulley
Crankshaft pulley
G190A01GK
| Categories | Hyundai Manuals, Hyundai Coupe Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Coupe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)