WHAT TO DO IN AN EMERGENCY 3- 9
D060E01A-AAT
4. Put the Jack in Place
D060F02E-AAT
5. Raising the Car
!
WARNING:
Do not get under the car when it is
supported by the jack! This is very
dangerous as the vehicle could fall
and cause serious injury or death.
No one should stay in the car while
the jack is being used.
Wrenchbar
D060G01Y-AAT
6. Changing Wheels
Wheel nut wrench
HTB157
HFC4022
The base of the jack should be placed
on firm, level ground. The jack should
bepositionedasshowninthedrawing.
After inserting a wrench bar into the
wheel nut wrench, install the wrench
bar into the jack as shown in the draw-
ing.Toraisethevehicle,turnthewheel
nut wrench clockwise. As the jack be-
gins to raise the vehicle, double check
that it is properly positioned and will
not slip. If the jack is on soft ground or
sand,placeaboard,brick,flatstoneor
other object under the base of the jack
to keep it from sinking.
HTB228
Raise the car high enough so that the
fullyinflatedsparetirecanbeinstalled.
To do this, you will need more ground
clearance than is required to remove
the flat tire.
Loosen the wheel nuts and remove
themwithyourfingers.Slidethewheel
off the studs and lay it flat so it cannot
rollaway. Toputthewheelonthehub,
pick up the spare tire, line up the holes
| Categories | Hyundai Manuals, Hyundai Getz Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Getz |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)