VEHICLE MAINTENANCE REQUIREMENTS 5- 9
F060F01A-AAT
o Vacuum, Crankcase Ventila-
tion Hoses
F060J01A-AAT
o Spark Plugs
F070C01A-AAT
o Engine Coolant
Make sure to install new spark plugs
of the correct heat range.
The coolant should be changed at
the intervals specified in the mainte-
nance schedule.
Inspect the surface of hoses for evi-
dence of heat and/or mechanical dam-
age. Hard and brittle rubber, cracking,
tears, cuts, abrasions, and excessive
swelling indicate deterioration. Partic-
ular attention should be paid to exam-
ine those hose surfaces nearest to
high heat sources, such as the ex-
haust manifold.
Inspect the hose routing to assure
that the hoses do not come in contact
with any heat source, sharp edges or
moving component which might cause
heat damage or mechanical wear.
Inspect all hose connections, such as
clamps and couplings, to make sure
they are secure, and that no leaks are
present. Hoses should be replaced
immediately if there is any evidence
of deterioration or damage.
F060N01X-GAT
o Valve clearances (1.1 L)
F070D01A-AAT
o Manual Transaxle Oil
Incorrect valve clearance will not only
result in unsteady engine operation,
but will also cause excessive noise
and reduced engine performance. In-
spect valve clearance and adjust as
required while the engine is hot.
Inspect the manual transaxle oil ac-
cording to the maintenance schedule.
NOTE:
If the oil level is low, check for
possible leaks before adding oil.
Do not overfill.
Valve-to-rocker arm clearance
Intake valves ..... 0.2 mm (0.008 in.)
Exhaust valves ... 0.25 mm (0.010 in.)
F070E03A-AAT
o AutomaticTransaxleFluidand
Filter
F070B01A-GAT
o Cooling System
The fluid level should be in the "HOT"
range of the dipstick, after the engine
and transaxle are at normal operating
temperature. Check the automatic
transaxle fluid level with the engine
running and the transaxle in neutral,
with the parking brake properly ap-
plied. Use DIAMOND ATF SP-III or
SK ATF SP-III when adding or chang-
ing fluid.
Check the cooling system part, such
as radiator, coolant reservoir, hoses
and connections for leakage and dam-
age. Replace any damaged parts.
F060H01A-AAT
o Air Cleaner Filter
A Genuine Hyundai air cleaner filter is
recommended when filter is replaced.
| Categories | Hyundai Manuals, Hyundai Getz Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Getz |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)