DRIVING YOUR HYUNDAI 2- 5
SC090D1-F
To Remove the Ignition Key
SC060A1-E
STARTING THE PETROL
ENGINE
NOTE:
Do not operate the starter for more
than 15 seconds continuously or
continue to operate the starter after
theenginehasstartedtoavoiddam-
aging the starter motor. If the en-
ginemakesafalsestart,allowitand
the starter motor to come to rest
before attempting to start the en-
gine again. Never attempt to start
the engine with the transaxle in
gear. Do not depress the accelera-
tor pedal whilst starting the engine.
Allow the engine to idle for 20 sec-
onds or so before driving the ve-
hicle.
ACC
LOCK
ON
START
C070C01E
1
. Turn the ignition key to the "ACC"
position.
C050A01E
1.
2.
Ensure that the transaxle is in neu-
2.
Simultaneously push and turn the
ignition key counterclockwise from
the "ACC" posi-tion to the "LOCK"
position.
tral and that the clutch pedal is held
depressed(manualtransaxle)orthe
transaxle selector is at the "P" posi-
tion (automatic transaxle vehicle).
Turn the ignition key to and hold at
the "Start" position until the engine
starts.Whentheenginehasstarted,
release the key.
!
CAUTION:
Donotleavethevehicleunattended
whilst idling. Never allow the ve-
hicle to idle or warm up in a con-
fined space (ie garage) longer than
is necessary to move the vehicle
into an open area.
3.
The key can be removed in the
"LOCK" position.
tbuk-2.p65
5
3/23/04, 4:55 PM
| Categories | Hyundai Manuals, Hyundai Getz Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Getz |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)