2004 Hyundai Getz Owners Manuals

WHAT TO DO IN AN EMERGENCY  3- 11
D060I01E-GAT
Wheel nut tightening torque:
After you  have  changed wheels,  al-
ways secure the flat tire in its place in
the luggage room and return the jack
and tools to their proper storage loca-
tions.
8.  Lower  Vehicle  and  Tighten
Nuts
Steel wheel & aluminium alloy wheel:
900-1,100 kg.cm (65-80 lb.ft)
D060J01FC-GAT
After Changing Wheels
D080A01TB-GAT
IF YOUR CAR MUST BE TOWED
HTB150
Lower the car to the ground by turning
the  wheel nut  wrench  counterclock-
wise.  Then  position  the  wrench  as
shown in the drawing and tighten the
wheelnuts.Besurethesocketisseated
completely over the nut. Do not stand
on the wrench handle or use an exten-
sion pipe over the wrench handle.
Go around the wheel tightening every
other nut until they are all  tight. Then
double-check each  nut for tightness.
After changing wheels, have a techni-
cian  tighten the  wheel  nuts  to their
proper torque as soon as possible.
o OK FOR  AUTOMATIC  OR MANUAL
TRANSAXLE EQUIPPED VEHICLE
HTB151
If you have  a tire gauge, remove the
valve cap and check the air pressure.
If the  pressure is  lower than  recom-
mended, drive  slowly to  the nearest
service station and  inflate to the cor-
rect pressure. If it is too high, adjust it
until it is  correct. Always reinstall the
valve cap after checking  or adjusting
tirepressure.Ifthecapisnotreplaced,
air may leak from the tire. If you lose a
valve cap, buy another and install it as
soon as possible.
HTB207
!
CAUTION:
Your car can be damaged  if towed
incorrectly!
Product Specification
Categories Hyundai Manuals, Hyundai Getz Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 445 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Getz
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field