FEATURES OF YOUR HYUNDAI 1-11
B070F01TB-GAT
Keyless Entry System
B070E01TB-GAT
Replacing the battery
(If Installed)
Locking doors
When the transmitter's battery begins
togetweak,itmaytakeseveralpushes
on the button to lock or unlock the
doors, and the LED will not light. Re-
place the battery as soon as possible.
1.
2.
3.
Close all doors.
Push the button on the transmitter.
At the same time all doors lock, the
turn signal lights will blink once to
indicate that the system is armed.
Battery type : CR1220
Replacement instructions:
Unlocking doors
HTB054
3.
Remove four screws back side of
the built-in circuit.
1.
2.
Push the button on the transmitter.
At the same time all doors unlock,
the turn signal light will blink twice to
indicatethatthesystemisdisarmed.
Battery
HTB053
1.
2.
Remove the screw with a (+) screw-
driver.
Separate the case with a (-) screw-
driver as shown in the illustration.
HTB055
4. Remove the old battery from the
case and note the polarity. Make
sure the polarity of the new battery
is the same (+side facing up), then
insert it in the transmitter.
| Categories | Hyundai Manuals, Hyundai Getz Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Getz |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)