WHAT TO DO IN AN EMERGENCY 3- 9
SD070F1-F
SD070G1-E
4. Put the Jack in Place
5. Raising the Car
!
WARNING:
Do not get under the car when it is
supported by the jack! The jack is
solely designed for wheel chang-
ing and is not intended to support
the vehicle for other purposes. The
use of purpose designed supports
is necessary whilst the vehicle is
raised and the operator is required
to get underneath.
Wrenchbar
Wheel nut wrench
HTB157
HFC4022
The base of the jack should be placed
on firm, level ground. The jack should
bepositionedasshowninthedrawing.
After inserting a wrench bar into the
wheel nut wrench, install the wrench
bar into the jack as shown in the draw-
ing.Toraisethevehicle,turnthewheel
nut wrench clockwise. As the jack be-
gins to raise the vehicle, double check
that it is properly positioned and will
not slip. If the jack is on soft ground or
sand, it may be necessary to place a
stout piece of timber under the base of
the jack to prevent it from sinking.
Raise the car high enough so that the
fully inflated spare wheel can be in-
stalled.
SD070H1-E
6.
Changing Wheels
HTB228
tbuk-3.p65
9
3/23/04, 4:24 PM
| Categories | Hyundai Manuals, Hyundai Getz Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Getz |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)