Controls in detail
Power windows
̈
Turn SmartKey in the starter switch to
position 1 or 2.
Fully opening the windows
(Express-open)
If the window still does not close when
there is no obstruction, then pull and
hold the switch again. The side window
will then close without the obstruction
sensor function
̈
Press switch 1 to 4 past the
Opening the windows
resistance point and release.
̈
Press switch 1 to 4 to the resistance
point.
The corresponding window opens
completely.
Warning!
G
The corresponding window will move
downwards until you release the
switch.
Fully closing the windows
(Express-close)
Driver’s door only:
If within five seconds you again pull the
switch past the resistance point and
release, the automatic reversal will not
function.
̈
Pull switch 1 to 4 past the
resistance point and release.
Closing the windows
̈
Pull switch 1 to 4 to the resistance
The corresponding window closes
completely.
point.
The corresponding window will move
upwards until you release the switch.
Stopping windows
!
If the upward movement of the window
is blocked during the closing
procedure, the window will stop and
open slightly.
Press or pull respective switch again.
̈
Warning!
G
If you pull and hold the switch up when
closing the window, and upward movement
of the window is blocked by some obstruc-
tion including but not limited to arms, hands,
fingers, etc., the automatic reversal will not
operate.
Remove the obstruction, pull the
switch again past the resistance point
and release.
201
Product Specification
Categories | Mercedes-Benz C-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz C-Class, Mercedes-Benz C230, Mercedes-Benz C240, Mercedes-Benz C32 AMG, Mercedes-Benz C320, Mercedes-benz W203 |
Model Year | 2004 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
It is a good reference material specially if you bought the car second hand