Practical hints
What to do if …
̄
What to do if …
Lamps in instrument cluster
General information:
If a bulb in the instrument cluster fails to
come on during the bulb self-check when
turning the SmartKey in the starter switch
to position 2, have it checked and replaced
if necessary.
Problem
Possible cause
Suggested solution
-
The yellow ABS malfunction
The ABS has detected a malfunction and has ̈ Continue driving with added caution.
indicator lamp comes on while
driving.
switched off. The BAS and the ESP are also
switched off (see messages in display).
Wheels may lock during hard braking,
reducing steering capability.
The brake system is still functioning normally ̈ Have the system checked at an autho-
but without the ABS available.
rized Mercedes-Benz Center as soon
as possible.
Failure to follow these instructions
increases the risk of an accident.
̈
Read and observe messages in the
display (୴ page 280).
The charging voltage has fallen below ten
volts. The ABS has switched off.
̈ When the voltage is above this value
again, the ABS is operational again.
̈
If necessary, have the generator
(alternator) and battery checked.
274
Product Specification
Categories | Mercedes-Benz C-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz C-Class, Mercedes-Benz C230, Mercedes-Benz C240, Mercedes-Benz C32 AMG, Mercedes-Benz C320, Mercedes-benz W203 |
Model Year | 2004 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
It is a good reference material specially if you bought the car second hand