Practical hints
Flat tire
The jack take-up brackets are located
directly behind the front wheel housings
and in front of the rear wheel housings.
Removing the wheel
̈
Jack up the vehicle until the wheel is a
maximum of 1.2 in (3 cm) from the
ground. Never start engine while
vehicle is raised.
1 Alignment bolt
̈
Unscrew upper-most wheel bolt and
remove.
1
2
Jack
Take-up bracket
Warning!
G
̈
Replace this wheel bolt with alignment
bolt 1 supplied in the tool kit.
̈
̈
Place jack 1 on firm ground.
Position jack 1 under take-up
bracket 2 so that it is always vertical
(plumb-line) as seen from the side,
even if the vehicle is parked on an
incline.
The jack is intended only for lifting the
vehicle briefly for wheel changes. It is not
suited for performing maintenance work
under the vehicle.
̈ Remove the remaining bolts.
!
Do not place wheel bolts in sand or dirt.
This could result in damage to the bolts
and wheel hub threads.
ț
Never start the engine when the vehicle
is raised.
ț
Never lie down under the raised vehicle.
̈
Remove the wheel.
319
| Categories | Mercedes-Benz C-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz C-Class, Mercedes-Benz C230, Mercedes-Benz C240, Mercedes-Benz C32 AMG, Mercedes-Benz C320, Mercedes-benz W203 |
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Automotive readers have rated 2004 Mercedes-Benz C-Class Operators Manual C230 C240 4MATIC C320 4MATIC C320 C32 AMG 5.0 out of 5.0 based on 1 product reviews. It is a good reference material specially if you bought the car second hand