Practical hints
Towing the vehicle
!
G
i
Warning!
To be certain to avoid a possibility of
damage to the drive train, however, we
recommend the drive shaft be discon-
nected at the rear axle drive flange
(vehicles with 4MATIC: disconnected at
the front and rear axle drive flanges) for
any towing beyond a short tow to a
nearby garage.
To signal turns while being towed with
the hazard warning flasher in use, turn
SmartKey in starter switch to
position 2 and activate the combina-
tion switch for the left or right turn
signal in the usual manner – only the
selected turn signal will operate.
If circumstances require towing the vehicle
with all wheels on the ground, always tow
with a tow bar if:
ț
ț
the engine will not run
there is a malfunction in the power
supply or in the vehicle’s electrical
system
Upon canceling the turn signal, the
hazard warning flasher will operate
again.
as that will be necessary to adequately
control the towed vehicle.
Prior to towing the vehicle with all wheels on
the ground, make certain that the SmartKey
is in starter switch position 2.
If the SmartKey is left in starter switch
position 0 for an extended period of time, it
can no longer be turned in the switch. In this
case, the steering is locked. To unlock,
remove SmartKey from starter switch and
reinsert.
329
| Categories | Mercedes-Benz C-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz C-Class, Mercedes-Benz C230, Mercedes-Benz C240, Mercedes-Benz C32 AMG, Mercedes-Benz C320, Mercedes-benz W203 |
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Automotive readers have rated 2004 Mercedes-Benz C-Class Operators Manual C230 C240 4MATIC C320 4MATIC C320 C32 AMG 5.0 out of 5.0 based on 1 product reviews. It is a good reference material specially if you bought the car second hand